Simple parts.
Serious steel.
Everything Strutt makes is built from one idea: a steel bay that shares its posts with the bay next to it. Here is what goes into one, and everything you can add.
Where two bays meet.
- 25 × 25 mm steel post, 1.5 mm wall, powder coated, drilled for your exact shelf heights.
- Folded steel runners front and back, 2 mm, with a lip that covers the shelf edge, so you only ever see steel.
- Side channels at each end of every shelf. On a shared post the two bays' tabs sit side by side, each with its own bolt.
- M6 bolts right through the post: button heads outside, dome nuts inside. No clips, no wobble.
- Shelves drop in and sit inside the steel frame; from 900 wide a hidden steel stiffener runs underneath.
Build from these
SHV-BASEBase bay
The bay that stands on the floor: levelling feet, a bottom shelf 90 mm up and a shelf at your chosen height. Docks on either side of another base.
SHV-BAYShelf bay
Stacks on a base or another shelf bay and takes its width. Each one its own height, 250 to 600 mm.
SHV-BENCHWorkbench
A base bay with a worktop at standing height (850–1,000 mm), a middle and a bottom shelf. Joins the run like any bay.
SHV-RISERRiser
Sits on the bench: the back posts carry on up to a 250 mm top shelf, with room for a panel, a bin rail and a light.
SHV-DRAWERSDrawer unit
One to four folded-steel drawers on full-extension runners, sized to the shelf space it sits in.
SHV-CUPBOARDCupboard
One door up to 600 wide, a pair above; an inner shelf in the taller ones. Optional cam lock.
SHV-BACKPlain back
A flat 1.5 mm steel back between the back posts, bay by bay.
SHV-BACK-PEGPegboard back
10 mm square slots at 38 mm, for standard pegboard hooks.
SHV-BACK-PERFPerforated back
A fine round perforation that lets air through and still hides the wall.
SHV-BACK-GRIDGrid mesh back
2 mm laser-cut 40 mm grid: hang tools, baskets and hooks anywhere.
SHV-BINRAILBin rail
A louvred rail on the riser with hook-on bins in five colours, as many as the width fits.
SHV-LEDLED light bar
Three warm spots under the riser shelf, lighting the worktop.
Colour it in.
Steel frame, back panels, drawer and door fronts
Shelves
Workbench tops
Handles in brushed steel, black or chrome: a bar, a full-width pull rail or a recessed cup. Frame, fronts and backs can each be a different colour.